Page 11 - Blog

By this point, the disassembly of the realme 12 Pro+ is basically complete. realme's strategy is clear, with a fixed product positioning and budget, more costs are allocated to the exterior design and imaging system. First of all, the face of the project to do a good job, although the "body" is a mid-range machine, but put on a variety of design and decorative embellishments of the "coat", but it does have a bit of high-end style. Secondly, the image side of the farewell 200 million pixels, began to enter the professional photography mode of the track, the flagship main camera + periscope telephoto combination, obviously more practical, but also better to use. Since the budget is limited, the first two increased investment, that other aspects are bound to weaken, the more obvious is the core configuration and fast charging, not strong processor, the level of half a grade of memory and flash memory specifications, moderate fast charging power, these summarized is ...... bland. And this "bland",

As suspected earlier, the graphite thermal paste extends upwards to cover most of the core areas of the motherboard, including the three main components. The contacts in the upper left corner and the middle of the right side correspond to the NFC coils, the three contacts in the upper right corner correspond to the flash, the four contacts in the middle correspond to the ambient light sensor, and the two contacts in the lower left corner correspond to the antenna FPC.The inside of the cover is also well protected, with the two pieces of foam in the upper left corner corresponding to the speakers, and the openwork foam next to them corresponds to the front-facing lens and its BTB, with the ultra-wide-angle lens receiving special care, and not only the BTB but the ultra-wide-angle lens receiving special care, but the BTB is protected by the graphite heat sink. Not only does the BTB have a foam pad, the four corners of the lens have a corresponding buffer foam. The bottom row of BTB naturally

the iQOO Neo9 equipped with that Flicker sensor, that is, the anti-flicker light sensor, it is a kind of ambient light sampling sensor, can be in the indoor light, artificial light environments, to monitor the frequency of ambient light sources of the stroboscopic flicker, to provide real-time exposure deployment, so as to inhibit stroboscopic flicker generated when taking pictures. For example, stroboscopic flicker is often seen when taking pictures of TV screens or projection images. A cell phone equipped with the Flicker sensor can avoid stroboscopic flicker problems and capture normal images. It works by detecting the frequency of the light source, obtaining the light source period, calculating the light source time, and adjusting the exposure time to eliminate the strobe effect. In fact, this is not a new technology, not to mention black technology, before the iPhone 7 series, Honor Magic 3 series, Honor Magic 5 series, Xiaomi 10 series, Redmi K50 series, Nubia Z40S Pro, Nubia Z60

The OnePlus Buds 3 look familiar. Strip away the color, and both the case and the Buds echo last year’s OnePlus Buds 2 Pro. From the blown cushion look of the case and recessed pairing button to the speaker bulb and capacitive stalks, OnePlus has stuck with the design. With the company also offering Buds in the Nord range, which captures a lower price point, the Buds 3 will take up the mid-point in the portfolio.

Of all the new phones released recently, which one is the best looking, or, which one has the most impressive design, it has to be the Red Magic 9 Pro+, which is really one of those products that grows on the public aesthetic. The lines are simple and angular, with no cutouts on the front and no bumps on the back. As the netizens said, Red Magic has made a real MIX in the hearts of Mi fans, I wonder if you like this design of Red Magic 9 Pro+? Today let's take a look at what its internal structure is like and how the camera is made flat.

The protagonist of this dismantling, it is the Honor has just released Magic6, it is also the main product of Honor, with the previous dismantling of OPPO Find X7, we still want to go through the standard version, to see what kind of quality foundation this new series of products, what level of materials and workmanship is, and what kind of internal structure is

the Huawei Pocket 2 has a unique design that draws inspiration from Tahitian pearls, and you can feel the noble temperament from the "Tahitian Gray" color scheme alone. The symmetrical dual-ring design also demonstrates the beauty of harmony and order, and the internal and external screens have been upgraded for a more comfortable experience. The Huawei Pocket 2 combines a number of advantages in one device, making it worth recommending.

Ending with a teardown related chat, this installment is about the mid-architecture design used on the ROG 8 Pro. The reason why it looks so complex and has so many FPCs inside is fundamentally influenced by the mid-architecture. In common three-segment architecture phones, many components can be directly connected to the motherboard, such as the rear lens, front lens, and even some can be directly integrated on the motherboard, such as the noise-canceling microphone and ambient light sensor. But to the middle of the architecture of the phone, because the location of those parts can not be moved, and concentrated in the upper part, they and the motherboard pulled away from a long distance, the middle is also separated from a battery, these densely packed FPC, became their connection to the motherboard, the realization of their respective functions of the "pipeline" and "bridge ". Those components mentioned earlier, are through this way, directly or indirectly connected to the motherboard.