LAUNCH X431 CRP909E Car Full System Diagnostic Tool

LAUNCH X431 CRP909E Car Full System Diagnostic Tool Professional Auto OBD OBD2 Scanner A/F TPMS DPF 26 Reset Service WIFI Update Online

Multi-Language: English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean.

Automotive All Controlled Modules Scanning and Problem Diagnostics

The diagnostic tool is ingeniously designed to troubleshoot all systems, for most of the major vehicles on the road today:

●Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
●Read & erase DTCs to locate problem areas and clear the codes.
●View Live Data of each parameter item.
●With it, you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, etc., and save you the hassle of diagnosing any un-identified car errors you’d ever met.

All Controlled Modules Scanning and Problem Diagnostics, such as Engine System, Airbags System, ABS System, Transmission System, Brake System, Alarm System, Keyless Entry System, TPMS System, Steering System, Wheel System, Fuel System, etc.

26 HOT RESET SERVICE

1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Reset: Help replace and reset the brake pad. 3.BAT battery service(BMS):Clear the fault information of low battery and make it match again

4.DPF service : Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

5. SAS Steering Angel Sensor Reset: Reset the steering angle to zero to keep the car running straight.

6.IMMO Key Programming(Anti-theft Matching): Disable any lost keys and add new keys. **ONLY for cars with easy IMMO system.

7. ABS Bleeding: Help exhaust the air.8. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.

9. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Throttle Adaptation: Initialize the throttle actuators to the default state. 11. AFS Headlamp Reset: Initialize the adaptive headlamp system.

12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

13. Suspension Reset: Adjust the vehicle body height sensor for level calibration.14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.15. Gear Learning: Monitors certain camshaft position sensors signals.

16.Tire Reset: Set the size parameters of the modified or replaced tire. 17.A/F Reset:Set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

19.Coolant Bleeding: Activate the electronic water pump 20.Language Change:Change vehicle system language.

21.Nox Sensor Reset: Reset catalytic converter learned value stored in ECU. 22.Stop/Start Reset:Set up the automatic start-stop function in ECU

23.Seat Calibration: Calibrate the memory in replaced or repaired seats. 24.Transport Mode:Deactivate the transport mode.

25.Windows Calibration: Perform door window matching to recover ECU initial memory.

26.AC System Relearn/Initialization

Full OBD2 Check--Make a Better Detection for Car Engine System!

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

More Features you can get!

●Live Data on Graph

●Auto Vin Reading, Makes Diagnostic More Fast

●Display Real-Time Battery Voltage

●Screenshot & Screen Recorder, Scan the QR to Share & Print Diagnostic Report

●One-click Update Online

●DTC lookup

Share Diagnostic Report

Generate Diagnostic report with one clicK, share the diagnostic report with your friends, find out the problem quickly and easily.

60+ Car Brands , Over 5000+ Models

Product Parameters

LAUNCH CRP909E Packing List